5
Reverso Pumps, Inc. www.reversopumps.com | [email protected] | Ph: (954) 522-0882
Technical Specifications
Flow Rate
Approximately 210 GPH (795 LPH)
Dimensions (H x W x L)
Wall Mount
28.2” x 28.2” x 11” (716 mm x 716 mm x 279 mm)
Enclosure
34.5” x 30” x 12” (876 mm x 762 mm x 305mm)
Enclosure with Stand
34.5” x 59.75” x 12” (876 mm x 1518 mm x 305 mm)
Operating Temperature
40 - 104°F (4-40°C)
Amp. Draw
3A@110V, 1.2A@220V
Circuit Breaker
10A@110V, 10A@220V
Watts
140
W
Service Space
4” on top and bottom, to facilitate changing filter elements and
draining water and particulate from the bowl
Pump
Brass Gear stainless shaft- double lip seal
Max. Lift
15 ft / 4.7 m with foot valve above liquid level
Timer
Digital
PLC
Inlet
3/4” #12 male JIC flare fitting
Outlet
3/4” #12 male JIC flare fitting
Max Fluid Viscosity
29 CST
Filter Torque Values
Bowl Retainer Ring
12 Nm (105 in-lbs)
Lid
12
Nm
(105
in-lbs)
Plug
15
Nm
(130
in-lbs)
Bleed
Screw
6
Nm
(50
in-lbs)
• The system has been developed to be used with diesel fuel only, DO NOT USE WITH GASOLINE.
• The system is designed to meet environmental standards for safe operation (NOT for use with fluids that have a
flash point below 100°F (38°C), e. g.: Gasoline, alcohol,...)
Warning
