DISPLAY EXPLANATION FOR:
RO-CRISTALLE
Every time device’s power cord is turned on, you will
see a display showing all indicators for 6 seconds.
This indicator stays turned on at all times. It means that
all functions of device are working properly and
correctly.
This indicator turns on when the time has reached to
preform maintenance. In case this indicator stays on
for longer period of time device will block and stop
functioning until maintenance is not completed. For
more information about maintenance schedule
please contact your local distributor.
This indicator will turn on in case any type of
malfunction occurs. In this moment device will stop
functioning and it is advised to contact AUTHORISED
SERVICE CENTER
-No feed water
-Leak
-Very low feed water pressure
-Bad quality of feed water
-Pump failure
-Electronics failure
In case of no feed water, it is not necessary to contact
your local AUTHORISED SERVICE CENTER. Device will
start again as soon as feed water becomes available,
we advise to close the device’s feed water valve so any
bigger dirt particles do not enter device.
Device’s name
Service
Error
Malfunctions that can happen are:
ON/OFF indicator
This indicator will light while device is not being used
or while device not making pure water. As soon as
device starts purification process or conducts
membrane automatic flushing (every 6 hours), this
indicator will start blinking and remain like that untill
the tank is full.
