4
Remote Pairing
Your power base has an emergency
lowering feature in the event that your
power base is in the raised position
and has lost power due to a power
outage.
Emergency Power Down
Feature
Locate and remove the cover for the
9 volt batteries on the control box or
power supply box.
Press the “FLAT” button or the
individual lowering buttons.
Once the bed returns to the flat
position, remove the batteries from the
Control box.
Install the two (2) alkaline 9 volt
batteries and replace the battery
cover.
NOTE: DO NOT raise the base
when powered with only backup
batteries. The batteries are only
intended to lower the base in case
of emergency.
STEP 1
STEP 2
STEP 3
STEP 4
Manufactured by Reverie
®
For Warranty and Service:
1-800-973-8374
Please have your receipt ready and
available.
Thank you and enjoy your power
base.
www.reverie.com
Register Online. For easy
registration of your warranty visit
https://reverie.com/register-your-
warranty
Please prepare a digital copy of
your proof of purchase (invoice
or sales receipt) when registering
online. You may be required to
provide the Serial Number for
registration, you can find it on the
Law Tags attached to the base.
Press any button on the remote
control. When the control box light
turns solid, the remote should be
successfully paired.
Test and verify the remote is
correctly paried by activating
functions of the power base. You
have now completed the pairing
process.
Place batteries into the remote
control (3 x AAA batteries).
Ensure the power base is plugged
into a functioning outlet.
NOTE: If a new signal is not
received it will reset itself to
normal mode in 30 seconds.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Your remote is already paired
with your power base. Follow
the below instructions for
replacement remote pairing.
Press and hold the pairing button on
the control box until the indication
light blinks.