Reverie R300LP Owner'S Manual Download Page 11

Troubleshooting

In the event the Power Base fails to operate, investigate the symptoms and possible solutions provided in the chart below:

SYMPTOM

SOLUTION

No features of the Power Base will activate.

•  Make sure your remote is paired or plugged into 

the bed.

•  Your electrical circuit breaker may be tripped.

•  Verify the power cord is plugged into a working, 

grounded electrical outlet. 

A grounded, electrical 

surge protection device is recommended. 

Test the 

outlet by plugging in another working appliance.

•  This may be due to overload condition, remove the 

load and put the bed into the flat position and then 

move it all the way to maximum position to test that 

the functions are fully operational.

Lift function has minor interference during operation.

•  There may be an overload of weight on your bed. 

•  Press the lift buttons squarely & accurately.

•  The power base mechanism may be obstructed. 

Elevate the power base and check for an 

obstruction. Remove the obstruction. 

Head or foot section will elevate but will not return to 

the horizontal (flat) position.

•  The power base mechanism may be obstructed. 

Elevate the power base and check for an 

obstruction. Remove the obstruction.

•  The head section may be too close to the wall. The 

headboard may be too close to the edge of the 

mattress. Adjust if required.

Noise when operating the bed.

•  Check for obstructions under the bed. 

•  The actuators make a light noise during operation, 

this does not indicate any defect. 

•  Squeaking noise could be caused by a loose bolt. 

Identify and tighten the bolt. 

•  If no solution can be found please call Customer 

Service.

Excessive massage motor noise.

•  Make sure the massage motor cable is not loose 

and hitting the base structures. 

•  Verify that the bed is not positioned against a wall, 

nightstand, or other object that may cause the 

vibration or noise.

•  If this base is installed over a bed frame, verify the 

massage motors are not causing the bed frame (or 

bed frame components) to vibrate.

•  Verify that the headboard attachment hardware is 

firmly tightened.

Summary of Contents for R300LP














Reviews: