Reverberi GAK 50 Series, Use And Maintenance Handbook

Page: 7 / 37

Manuale del d’uso ed installazione – GAK 50
R-04 del 10-12-2008- Pag. 7 di 37
TECHNICAL FEATURES
DESCRIPTION
Unit of measure M505 M507 M512 M514 M515 M516
Feeding voltage V 400
Feeding frequency Hz 50
Motor pump power W 600
Water tank lt / / 34 34 / 34
Rpm of motor pump Rpm 2900
Resistance assembly power KW 36 44 36 44 60 60
Steam pressure Bar 5
Capacity at min. level (NW) lt 31
Overall dimensions mm 680x820x H=900
Packing dimensions mm 800x900x H=1050
Maximum weight Kg. 125 125 130 130 125 130
INSTALLATION
Remove cardboard packaging and unscrew the 4 screws fixing the feet to the pallet. Let the
boiler slide slowly and assemble the 4 rubber feet provided in the equipment.
While carrying our this operation, it is necessary to be careful in handling the boiler, avoiding
any impact.
WATER CONNECTION
The washing machine type rubber pipe provided in the equipment should be connected to a
water mains tap.
For the models provided with tank, it is necessary to make the first filling easier by pouring an
amount of water equal to half the tank capacity.
Feed the machine with medium acidity water only (pH 7,5 +/-0,5).
EXHAUST CONNECTION
Connect the boiler exhaust tap (10) to a clothed rubber pipe of a copper pipe (do not use plastic
pipes).
Exhaust outside into the invironment or into a receptacle ret for the purpose.
ELECTRIC CONNECTION
These steam generators are standard.manufactured with three phases and an operating
voltage of 400 Volts (50Hz).
The control components work at a single-phase voltage of 230 V, therefore it is necessary to
use a suitable 5-wire cable and a general switch complying with the current safety standards.
A) Remove panel.
B) Put cable into press.
C) Connect wires into the marked terminals set for the purpose.
D) Close panel again.