3.2.
ASSEBLY “STEP BY STEP”
The curtain can be assembled on wall or ceiling. If any components
are not included in the kit, you should buy them yourself and make sure
they are suitable for this type of installation.
a)
wall mounting
-
unscrew the fixing screws to remove the mounting plate from the back
of the main body
-
install mounting plate on the wall
-
install the main body. Set the main body onto the upper end of the mounting
plate and clamp it as shown
3.
INSTALLATION
3.1.
GENERAL PRINCIPLES
The following figures show the recommended distances between the air curtain
and the building partition
:
The width of the curtain should be greater or equal to the width of the door frame.
When the entrance is wider than the unit, it is recommended to install two or more
units in parallel. In this case, provide 10-40 mm gaps between the units.
