12
13
English
24924
• In general, it must be ensured that
the model cannot injure anyone in
consideration of potential malfunctions
and defects.
• The model may only be repaired or
modified with genuine Revell control
spare parts. Otherwise, the vehicle
can be damaged or pose a danger. In
order to prevent risks, always operate
the model from a position which
provides an easy line of retreat, if
necessary.
Transmitter safety instructions:
• Rechargeable batteries must be
removed from the transmitter or the
model prior to recharging.
• Non-rechargeable batteries may not
be charged.
• Rechargeable batteries may only
be charged under the supervision of
an adult.
• The combination of different types of
batteries as well as new and used
batteries must be avoided.
• Only recommended batteries or those
of an equivalent type may be used.
• We recommend new alkali manga-
nese batteries for the transmitter.
Single-use batteries for this transmit-
ter and other electrical devices
operated in the home can be
replaced with environmentally-friendly
rechargeable batteries.
• Before using for the first
time, make sure that you
have read and understood the
entire manual.
• Please keep the manual and
packaging as they contain important
instructions.
• The user should only operate this
model in accordance with the
instructions for use in this operating
manual.
• This model is suitable for pilots who
are at least 8 years of age. Parental
supervision is required when driving it.
•
Warning!
Not suitable for children
under 36 months. Small parts.
Choking hazard!
• This model is suitable for use indoors
and in dry outdoor areas.
• Keep your hands, face and loose
clothing away from the model during
operation.
• Switch off the transmitter and model
when they are not in use.
• Remove the batteries from the
transmitter and the model when they
are not in use.
• Always maintain visual contact with
the model in order to avoid losing
control of it. Inattentive and careless
use can lead to considerable damage.
• Do not operate the model near people,
animals, roads or bodies of water.
• This model is not suitable for people
with physical or mental limitations.
We recommend that people who are
unfamiliar with transmitter models
operate the model under the guidance
of someone with experience.
• A model should never be operated
under the influence of drugs or alcohol.
• This vehicle may not be used on public
roads!
IMPORTANT FEATURES
Safety instructions:
• Batteries must be inserted according
to the correct polarity (+ and -).
• Depleted batteries must be removed
from the transmitter.
• The connection terminals may not be
short-circuited.
• Remove the batteries from the
transmitter and model if they are not
to be used for an extended period of
time.
Maintenance and care:
• Please only use a clean, damp cloth to
wipe down the model.
• Protect the model and batteries from
direct sunlight and/or direct heat.
• Never allow the transmitter to come
into contact with water, because the
electronics can be damaged as a
result.
• Technical changes and differences in
colour reserved!
1
VEHICLE
1A
Bucket
1B
Forearm
1C
Main arm
1D
Superstructure
1E
Battery
compartment
1F
Battery com-
partment latch
1G
OFF/ON switch
1H
Upper bolt
(round)
1I
Lower bolt
(square)
2
TRANSMITTER
2A
Left throttle
2B
Right throttle
2C
Rotate super-
structure
anti-clockwise
2D
Rotate super-
structure
clockwise
2E
Main arm up
2F
Main arm down
2G
Forearm up
2H
Forearm down
2I
Bucket up
2J
Bucket down
2K
Demo button
2L
Light/sound
ON/OFF
2M
Record button
2N
ON/OFF switch
2O
Power LED
3
INSERTING BATTERIES
3A
Unscrew and remove cover
3B
Insert 2 x 1.5 V AA batteries and pay
attentiontothepolarityspecifica
-
tions, as indicated in the battery
compartment.
3C
Close the battery cover and secure
with the screw.
6-channel excavator with 2.4 GHz
transmitter
• Main arm, forearm and bucket can be
controlled separately
• high traction track drive
• With sound module
A A
A A
Technical data
Rechargeable battery
for the model:
Power supply: ===
Rated output: 1x DC 7,2 V / 400
mAh / 2,88 Rechargeable NiMH
battery
(included)
USB charger:
Power supply:
DC 5V via USB port,
500 mA or higher
Rated output: 5 V / 1000 mA max.
Batteries for the
transmitter:
Power supply: ===
Batteries: DC 3 V /
2 x 1,5 V “AA”
(not supplied)
