#25 Chain Tool
Copyright © 2018 REV Robotics, LLC
5
Step 4
With the chain in place it can now be broken. Turn the
Allen Key until the pin is entirely removed from the chain.
Make sure to have a master link on hand (REV-41-1366).
You must have one empty link on either side; two plates
will not work. The picture shows an example of this step
at completion.
Note: Remove the cup point set screw before breaking
the chain. This will allow for the pin to completely remove
itself from the chain.
Step 5
Place the master link into both links. Next take the plate
and put it over the master link. Use pliers and the
included clip to lock the master link into place.
Step 6
Done! Chain is ready for use!
