#25 Chain Tool
Copyright © 2018 REV Robotics, LLC
4
2
USING THE TOOL
This section of the guide details two ways to utilize the #25 Chain Tool, using master links and resetting the chain pin.
The included 3mm Allen Wrench works on all three screws of the tool.
2.1
USING MASTER LINKS
Step 1
Unscrew the pin screw and compression screw such that
they are flush with the chain channel.
Step 2
Insert #25 chain (REV-41-1365) into the chain channel
and align the desired link between the two vertical pins in
the channel.
Step 3
Next secure the chain in place with the compression
screw. Tighten until the chain cannot shift within the
channel.
