Retsch PP 35, Manual

Page: 30 / 48

Operating the Device
30

Select the desired program and confirm with [ENT].

Touch [Menu] to return to the main screen.
6.5.2 Edit program

Here is where all previously stored parameters, such as pressure force and holding time,
can be altered. It is also possible to enter new parameters.

Proceed as in the previous chapter.

Instead of [Change program], touch [Edit program] now.
Fig. 29: Edit program

Enter password 1234 and confirm with [ENT].
Fig. 30: Enter password

The maximum pressure force is 35 tonnes. The parameters can be reduced!
NOTE
When using the pressing tool for the steel ring, the maximum pressure
force must be reduced to 15 t and reduced to 25 t for the 32-mm-dia. aluminium
cup.

Enter the desired holding times and pressure force for 1 / 2 / 3-step pressing.

Confirm each selection with [ENT].