Retsch PP 35, Manual

Page: 27 / 48

Operating the Device
27
6.4.2 Pressing in the steel ring
NOTE
When pressing in the steel ring, make sure that the pressure force is
reduced to a maximum pressure of 15 t.
Insert the pressing tool for steel rings and proceed as described in Chapter 6.4.1.
If the pellet is not pressed out completely, the pressing-out time must be extended. See Chapter
6.5.3.
Fig. 22: Pressing tool for steel rings

Insert the steel ring with the flat rim facing upwards.
Fig. 23: Insert the steel ring .

Fill the feed material into the ring.