DustMon RD 100 using PC control unit / software installation
39
8.8 Calculating results as an average
The DustMon RD 100 software enables you to calculate the average from results that have
already been loaded.
Example: initial situation as shown below
– 3 results have been superimposed.
Fig. 32:
Calculating results as an average
Clicking on the button
(1)
"
" (=average) displays both an additional curve in the graph and
another row of data
(2)
in the table.
Fig. 33:
Displaying the average
The average is also shown in the graph, but may be covered by the other curves.
Proceed as follows to only display the average curve:
Mark all data series below the graph (by clicking and holding down the Ctrl button) and fade the
curves out (right click to open the command screen, then select "Hide").
Now only the average is visible as a graph, as shown below.
1
2