Retsch AS 200 jet, Manual

Page: 6 / 64

Notes on the Manual
6
1 Notes on the Manual
Dear user,
please read the following manual referring to this device carefully before starting any
installation, commissioning and operation.
This manual is a technical guide on how to operate the device safely and it contains all the
information required for the areas specified in the table of contents. This technical
documentation is a reference and instruction manual. The individual chapters are complete in
themselves. Familiarity (of the respective target groups defined per area) with the relevant
chapters is a precondition for the safe and appropriate use of the device.
This manual does not contain any repair instructions. In case of any obscurities or questions
with regards to this document or the device, as well as if faults arise or repairs are necessary,
please contact your supplier or get in touch with Retsch GmbH directly.
Application-technical information relating to samples to be processed are not or only to a certain
extend included. However, more information thereof can be found in the internet on the
webpage of the respective device on the Retsch GmbH homepage (http://www.retsch.com).
Revision status:
This document revision 0015 refers to the manual "Air Jet Sieving Machine AS 200 jet" in
compliance with the Directive of Machinery 2006/42/EC.
1.1 Disclaimer
This document has been prepared with due care. Technical and software based modifications
are reserved. No liability is assumed for data loss, personnel injury or damage to the device
which results from the failure to observe the instructions and/or warnings in this document.
1.2 Copyright
This document or parts of it or its content may not be reproduced, distributed, edited or copied
in any form without prior written permission of Retsch GmbH. Damage claims shall be asserted
in the case of infringements.