14
Operating
Using the radio controlled Clock
The current outdoor temperature that is measured by the wireless outdoor
sensor is displayed on the outdoor temperature display (A2). Press the
DOWN/CF key (A8) to change between displaying the temperature in the unit
°C or in the unit °F.
Press the channel selection key CHANNEL (A4) and select the transmitting
channel (CH1, CH2, CH3) that has been selected on the wireless outdoor
sensor as well. Press and hold the channel selection key for approx. 2 se-
conds to delete all stored values of the selected channel.
On the left side of the temperature display a small arrow icon indicates the
tendency of the temperature.
The current indoor temperature in the selected temperature unit is displayed
on the indoor temperature display (A3). Additionally the temperature tendency
is indicated by a small arrow icon.
Press the MAX/MIN key (A5) to display the reached maximum respectively
minimum indoor and outdoor temperature for a few seconds. According to that
each value is marked with a MAX or MIN icon on the display.
Press the temperature alarm key ALERT (A6) to enable or disable the
temperature alarm feature. Press and hold the ALERT key for approx. 2 se-
conds to enter temperature alarm setting mode. The setup sequence is as
follows: upper limit, lower limit, exit temperature alarm setting mode.
In setting mode press the channel selection key CHANNEL (A4) to change the
channel you want to setup.
The factory default setting for the upper limit is +70 °C and the one for the
lower limit is -50 °C. In setting mode the values to be changed are flashing on
the display.
A2
A3
