PerkinElmer Optoelectronics
18
6.4 Camera Control
Camera control includes camera operating mode, video offset and video gain.
Each of these parameters is controlled by DIP switches accessible on the back of
the camera.
Figure 10 Camera Control DIP switch Location
Note:
Switch in the UP position is ON.
6.4.1 Camera Operating Mode Selection
The camera operating mode is selected by DIP switches 1 and 2 as shown in
Table 4.
Table 4 Camera Operating Mode Selection
Camera Mode
DIP Switch #1 DIP Switch #2
Master
ON
ON
Slave Mode
OFF
OFF
Alt Slave Mode 1
OFF
ON
Alt Slave Mode 2
ON
OFF
Note:
If the mode is changed while the camera is operating, the camera must be
powered down and restarted.
6.4.2 Video Gain
Video gain is set by DIP switches 3, 4 and 5 as shown in Table 5 and may be
adjusted while the camera is operating and does not require camera power off on
cycling for gain changes to take effect..
Table 5 Video Gain Selection
Range DIP Switch #3 DIP Switch #4 DIP Switch #5 Gain Times Full Scale
0
ON
ON
ON
0.67
1
ON
ON
OFF
1.00
2
ON
OFF
ON
1.50
3
ON
OFF
OFF
2.20
4
OFF
ON
ON
3.35
5
OFF
ON
OFF
5.00
6
OFF
OFF
ON
7.50
7
OFF
OFF
OFF
11.20
