PerkinElmer Optoelectronics
14
5.6 Frame Grabber Interface Guidelines
The LC3000 series cameras have been designed for use with several brands of
frame grabber. It is the users responsibility to select a frame grabber that is
specific to the application being served and to provide any signal conditioning
required to accept the differential analog video and support the RS-422 interface
signals. When choosing a frame grabber, the following points must be observed:
1. Camera model (for number of pixels in sensor array).
2. Camera exposure mode. Slave modes require external input signals. See
section 4.1.2 on page 6.
3. The frame grabber must be able to accept differential analog video.
Contact PerkinElmer for a list of recommended frame grabber vendors.
5.7 Cleaning the Sensor
Should the sensor become dirty the user can clean the face taking care to use
Isopropyl Alcohol only.
Caution: Do not allow any of the cleaning solution to contact any
internal components, sensor pins or connector pins.
Caution: Do not remove the cover over the sensor, or the faceplate.
There are no user serviceable parts inside.
