background image

Troubleshooting.

Warranty.

WARNING: 

Failure to disconnect power 

supply prior to troubleshooting any wiring issues may 
result in serious injury.

Problem: 

Fan fails to operate.

Solutions:

1. Check power to wall switch/wall control.

2. Check to be sure code switches in remote control 

transmitter and wall control are set properly.

3. Verify that receiver is wired properly.

4. Verify that wall control is wired properly.

5. Check to be sure fan is wired properly.

6. Check that red light on remote control transmitter 

turns on when a button is pressed indicating that the 

battery is good.

7. Learning process between fan, remote control 

transmitter and wall control may not have been 

successful and code was not activated. Turn off power 

and repeat instructions in next to last paragraph of 

Section 9 (page 8).

Problem: 

Fan fails to operate with remote control.

Solutions:

1. Check that red light on remote control transmitter 

turns on when a button is pressed indicating that the 

battery is good.

2. Check to be sure code switches in remote control 

transmitter and wall control are set properly.

3. Learning process between fan, remote control 

transmitter and wall control may not have been 

successful and code was not activated. Turn off power 

and repeat instructions in last paragraph of Section 9 

(page 8).

Problem: 

Fan wobbles.

Solutions:

1. Use the balancing kit provided in one of the 

hardware packs. 

If no blade balancing kit is provided, 

please call Customer Support,1-800-527-1292, to request 

one.

2. Check to be sure set screw(s) on motor housing yoke 

is (are) tightened securely.

3. Check to be sure set screw on hanging ball is 

tightened securely.

For parts and information, please refer to
"Parts Inventory" on page 2.
Customer Support:

1-800-527-1292

Parts Replacement.

LITEX LIFETIME LIMITED WARRANTY:
LITEX INDUSTRIES, LTD. warrants this fan to the original 
household purchaser for indoor use under the following 
provisions:
1-YEAR WARRANTY: LITEX INDUSTRIES, LTD. will replace or 
repair any fan which has faulty performance due to a 
defect in material or workmanship. Contact Litex Customer 
Service at 

1-800-527-1292

 to arrange for return of fan. 

Return fan, shipping prepaid, to Litex Industries, Ltd. We will 
repair or ship you a replacement fan, and we will pay the 
return shipping cost.
5-YEAR WARRANTY: LITEX INDUSTRIES, LTD. will repair or 
replace, at no charge to the original purchaser, any fan 
motor that fails to operate satisfactorily when failure 
results from normal use.
RETURN FAN MOTOR ONLY, shipping prepaid, to Litex 
Industries. We will repair or ship purchaser a replacement 
motor and Litex will pay the return shipping cost.
6-YEAR to LIFETIME LIMITED WARRANTY: LITEX 
INDUSTRIES, LTD. will repair the fan, at no charge to the 
original purchaser for labor only, if the fan motor fails to 
operate satisfactorily when failure results from normal use. 
Parts used in the repair will be billed to the purchaser at 
prevailing prices at time of repair.
    The purchaser shall be responsible for all costs incurred 
in the removal, reinstallation and shipping of the product 
for repairs.
    This warranty does not apply when damage from 
mechanical, physical, electrical or water abuse results in 
causing the malfunction. Deterioration of finishes or other 
parts due to time or exposure to salt air is specifically 
exempted under this warranty.
    Neither Litex Industries nor the manufacturer will 
assume any liability resulting from improper installation or 
use of this product. In no case shall the company be liable 
for any consequential damages for breach of this, or any 
other warranty expressed or implied whatsoever. This 
limitation as to consequential damages shall not apply in 
states where prohibited.

page 10

RESTORATION

HARDWARE

Summary of Contents for Bistro WOD52AGV5RW












Reviews: