HARDWARE FOR STEP #4:
Page 9 of 10
(AA)
1
4
" x 1 -
3
4
" BOLT = 4 PCS
STEP #4.1:
On both ends of the End Rail Panel are
holes for the bolt to pass through which
correspond to the holes on the posts of
both End Rail Panel with pre-installed
nuts. Align the holes of the Front Rail
Panel into the End Rail Panels then engage
Allen Head Bolt in each hole and tighten
with Allen wrench provided as in Detail H
& Detail I.
After assembly re-tighten all bolts to snug
fit. DO NOT OVER TIGHTEN
DETAIL I
STEP #4
STATIONARY FRONT RAIL ASSEMBLY
DETAIL H
ALLEN WRENCH
