E-18
OPERATION
1hour
Cancel
Remote Control Operation
Remote Control Use
1.Operate with the remote control facing the main unit receiver.
2.The signal range is about 19 feet (6 m).
3.Make sure there are no objects blocking the path of the signal.
4.Avoid dropping or damaging the remote control.
5.Do not use it in high humidity conditions or in direct sunlight or near a heat source.
www.respirade.com
POWER(ON/OFF) Button
The unit will start operating when
the POWER Button is
pressed.Pressing the button again
will stop operation.
SPEED Button
The fan speed can be
switched among Low,
Medium and High settings.
AUTO Button
At AUTO mode,the fan
speed is automatically
switched (H,M,L)
depending on the
amount of pollution in
the air.
TIMER Button
The set time switches every
time the button is pressed as
shown below.
2hour
4hour
**The indicator light shows
the set time.
Transmitter
ION Button
When pressed, the
generation of ions will
cease and the Negative
ion generator light on
the control panel will go
out.
RESET2 Button(UV Lamp Reset Button)
After UV lamp replacement ,ensure to
press the button 12 times for initialization.
Before pressing the Filter Reset Button, be
sure that the unit is plugged in.
RESET1 Button(Filter Reset Button)
After replacement of Activated Carbon
Filter,make sure to press the button 12
times for initialization.
Before pressing the Filter Reset Button,
be sure that the unit is plugged in.
Operation available with
the Remote Control:
.AIR FLOW
.OFF TIMER
.AUTO
.NEGATIVE ION ON/OFF
.RESET1
.RESET2
