E-21
CARE AND MAINTENANCE
1)Stop the operation and unplug the cord from the electrical
outlet
.
2)Open the front panel.
3)Remove the Activated Carbon Filter.
Activated Carbon Filter
Replacing the Activated Carbon Filter
Replace the Activated Carbon Filter when the"FILTER"
indicator light flashes in red.
Photo catalytic Filter and UV Germicidal Lamp
Photo catalytic Filter
UV Germicidal Lamp
Replacing UV lamp
Germicidal Light Radiation
Hazard
Never look directly at UV lamp or
place face directly on outlet grille.
Direct exposure to germicidal light
can cause temporary or chronic
damage to your eyesight,or even
blindness.
Always unplug the unit before
cleaning, servicing or replacing the
UV lamp.
WARNING
Photo catalytic filter is permanent, never needs
replacing.
When there is dust on it, clean the dust off using a
vacuum cleaner dusting brush. Do not wash it in
water.
When the "UV LAMP" indicator light flashes ,it is time
to replace the Ultraviolet germicidal lamp. Gently
rotate the lamp a quarter turn in either direction until it
unlocks from the socket.Pull the pins out the sides of
the socket,one end at a time.
NOTE:
1)Do not wash the photo catalyst filter in water.
2)Do not look at the UV lamp when it is lit,it can cause
personal injury.
1.
2.
After replacement of Activated Carbon filter or UV lamp, be sure to press
Filter Reset Button(RESET1 Button) or UV Lamp Reset Button(RESET2)
on the remote control for 12 times.Once the Reset Buttons have been
activated, you will hear a beep sound that means that the unit has been
reset and the FILTER or UV LAMP indicator lights will stop to flash.
CAUTION
