Resource Data Management PR0109, User Manual

Page: 8 / 17

Revision 1.2D Page 8 of 17
www.resourcedm.com
ML Switch User Guide
Warning
Please Note
The specifications of the product detailed on this
Set-Up Guide may change without notice. RDM
Ltd. shall not be liable for errors or for incidental
or consequential damages, directly and indirectly,
in connection with the furnishing, performance or
misuse of this product or document.
Ensure that all power is
switched off before
installing or maintaining
this product
Parameters
Number Parameter Range Bar (psi) Step Units Default Bar (psi)
P-01 Refrigerant None
R12
R13
R13b1
R22
R23
R32
R114
R134a
R142B
R227
R401
R401A
R401B
R402
R402A
R402B
R404A
R407A
R407B
R407C
R500
R502
R503
R507
R717
R290 (Propane)
R744 N/A None
P-02 Span -3.4 to 50.0 (-49.3 to 725) 0.1 Bar/psi 13.8 (200.0)
P-03 Offset -3.4 to 50.0 (-49.3 to 725) 0.1 Bar/psi 0.0 ( 0.0)
P-04 Glide 0 to 5 (9.0) 0.1
o
C (
o
F) 0.0
P-05 Pressure Type Absolute / Gauge Absolute
P-11 Evap 1 offset 0.0 to 0.5 (0 to 7.2) 0.1 Bar/psi 0.1 (1.0)
P-12 Evap 2 offset 0.0 to 0.5 (0 to 7.2) 0.1 Bar/psi 0.1 (1.0)
P-13 Evap 3 offset 0.0 to 0.5 (0 to 7.2) 0.1 Bar/psi 0.1 (1.0)
P-14 Evap 4 offset 0.0 to 0.5 (0 to 7.2) 0.1 Bar/psi 0.1 (1.0)
P-15 Evap 5 offset 0.0 to 0.5 (0 to 7.2) 0.1 Bar/psi 0.1 (1.0)
P-16 Evap 6 offset 0.0 to 0.5 (0 to 7.2) 0.1 Bar/psi 0.1 (1.0)
P-17 Evap 7 offset 0.0 to 0.5 (0 to 7.2) 0.1 Bar/psi 0.1 (1.0)
P-18 Evap 8 offset 0.0 to 0.5 (0 to 7.2) 0.1 Bar/psi 0.1 (1.0)
P-19 Evap 9 offset 0.0 to 0.5 (0 to 7.2) 0.1 Bar/psi 0.1 (1.0)
P-20 Evap 10 offset 0.0 to 0.5 (0 to 7.2) 0.1 Bar/psi 0.1 (1.0)
P-31 Transducer Fault Delay 00:00 to 99:00 01:00 Mins 10:00
P-32 Alarm Delay 00:00 to 99:00 01:00 Mins 20:00
P-33 HP Alarm -3.4 to 50.0 (-49.3 to 725) 0.1 Bar/psi 4.0 (58.0)
P-40 MOP -3.4 to 50.0 (-49.3 to 725) 0.1 Bar/psi 3.4 (50.0)
P-41 MOP Diff -3.4 to 50.0 (-49.3 to 725) 0.1 Bar/psi 0.3 (5.0)
P-42 Recovery Count 0
– 10
1 2
P-43 MOP Delay 00:00 to 02:00 00:01 min : sec 00:05
P-50 Humidity Low 0-100 1 rH 20
P-51 Humidity High 0-100 1 rH 60
P-52 Trim Low 0-100 1 % 30
P-53 Trim High 0-100 1 % 100
P-54 Trim Off Level 0-100 1 % 30
P-55 Trim Mode 0 =Off, 1 =On, 2 =Remote On