Scan
When playing a cd, pressing and holding these buttons will perform a fast forward or
backward scan. The program will be audible at a reduced level in play mode, and silent
in pause mode.
When the tuner is selected, these buttons ‘free tune’ and allow any frequency to be
selected. This will also force the tuner into SEEK mode.
When playing a cd, pressing these buttons selects the next/previous track. Holding
the button will rapdily advance through the tracks.
When the tuner is selected, these buttons act the same as the up/down buttons on
the XS front panel. In SEEK mode, the next station will be found. In PRESET mode,
the next preset will be selected.
0, 1, .. 9
When the tuner is the selected source, these buttons provide direct access to preset
stations available on the current band. If any other source is in use, they provide direct
access to tracks on the cd. For example, to go directly to track 25, press 2 followed by 5.
For track 2, either press 0 followed by 2, or press 2 and wait a moment.
Multifunction
Prev
Next
Setup Mode
The Opus 21 offers customization features accessible in the SETUP mode. For example, the inital
volume setting on power-up can be changed from the default of 50. To access this mode, place the
Opus 21 in standby (via remote control or front panel) and then press the REPEAT button on the
remote. Successive presses of the PLAY button will display the setup options as well as displaying the
firmware revisions present in each product. The custom settings selected in setup will be remembered
when power is disconnected. To exit setup mode, press the REPEAT button. The Opus 21 will re-enter
standby mode.
In setup mode, the tuner region can be changed. This will set the tuning steps and frequencies available for
the selected region. Note that changing regions will also clear all stored preset stations. Presets may also be
cleared by pressing the ‘5’ button during the appropriate setup option as indicated on the display.
