From all of us at Resolution Audio, thank you for choosing the Opus 21 XS. In conjuction with the Opus 21
compact disc player, the XS creates a complete 2-channel high performance audio system.
Unpacking
After unpacking your Opus 21 XS, inspect it for any shipping damage and contact us immediately if any is found.
Do not connect to the Opus 21 system if you find any shipping damage.
Please keep all packing materials for future transport. Shipping the Opus 21 in anything other than its original
crate may result in damage that is not covered by warranty. If you require a replacement crate or packing
materials, please contact Resolution Audio.
Should you need to repack the unit, be certain to place it between the supplied foam sheets,
with the accessory box on top.
The accessory box contains the following items:
Remote control
(2) AAA batteries
Digital cable for connection to Opus 21 cd player
AM loop antenna
To install the batteries in the remote control, open the cover on the back of the remote. Insert the batteries in
the orientation shown in the compartment, and replace the cover.
Installation
The XS must be used in conjuction with your Opus 21 cd player and Power Centre.
Your Power Centre may require a software update for use with the XS. Contact your dealer or Resolution Audio
directly for assistance.
Turn off the power to the Opus 21 at the rear of the Power Centre.
Prior to installation, all equipment should be turned off using the main power switch.
The XS must be located directly underneath your Opus 21 cd player.
First, remove the dust cover from the connector located on the bottom of your Opus 21 cd player. Next, position
the cd player directly on top of the XS, ensuring the connectors are aligned. Press the connectors firmly
together to secure the connection.
