
22
en
Installation
Displa
ys,
functions and options
Messages
Commissioning
Operation and function
The note also appears, when the booster is active.
In the status menu, the menu item Booster is available which can be used for heat-
ing to Toff outside the time frames.
The internal backup heating is balanced separately.
Note:
For information on timer adjustment see page 16.
4.9
Basic settings
In the Basic settings menu, all basic parameters for the controller can be adjusted.
Normally, these settings have been made during commissioning. They can be subse-
quently changed in this menu.
Adjustment
channel
Description
Adjustment range /
selection
Factory setting
Language
Selection of the menu language
Deutsch, English, Français,
Español, Italiano
Deutsch
Auto DST
Daylight savings time selection
Yes, No
Yes
Adjustment
channel
Description
Adjustment range /
selection
Factory setting
Date
Adjustment of the date
01.01.2001 … 31.12.2099 01.01.2017
Time
Adjustment of the current time 00:00 … 23:59
-
Factory setting back to factory setting
Yes, No
No
4.10 MicroSD card
SD card
Adjustment
channel
Description
Adjustment range /
selection
Factory setting
Rem. time
Remaining logging time
-
-
Options
Remove card...
Safely remove card
-
-
Save adjustments
Save adjustments
-
-
Load adjustments Load adjustments
-
-
Logging interval
Interval for data logging
00:01 … 20:00 (mm:ss) 01:00
Logging type
Logging type
Cyclic, Linear
Linear
Update
Firmware update
Yes, No
No
The controller is equipped with a MicroSD card slot for MicroSD memory cards.
With a MicroSD card, the following functions can be carried out:
• Logging measurement and balance values. After the transfer to a computer, the
values can be opened and visualised, e. g. in a spreadsheet.
• Store adjustments and parameterisations on the MicroSD card and, if necessary,
retrieve them from there.
• Running firmware updates on the controller.
Î
To safely remove the MicroSD card, always select the menu item Remove
card... before removing the card.
Î
Wait until Remove card is displayed.