background image

14

 

 

Device message/possible cause 

Solution 

All other error messages, for example, System fault, refer to user guide, Error 0XX 

An unrecoverable error has occurred on the device. 

Contact your care provider. Do not open the device. 

 

 
 

Reassembling parts 

Some parts of your device are designed to easily come off in order to avoid damage to the parts or 
the device. You can easily reassemble them as described below. 

 

To insert the humidifier seal: 

 

 
 

1.

 

Place the seal into the lid. 

2.

 

Press down along all edges of the seal until it is firmly in place. 

 
 

To reassemble the humidifier lid: 

 

 
 

1.

 

Insert one side of the lid into the pivot hole of the base. 

2.

 

Slide the other side down the ridge until it clicks into place. 

 
 

General warnings and cautions 

 WARNING 

 

Make sure that you arrange the air tubing so that it will not twist around the head or neck. 

 

Make sure the power cord and plug are in good condition and the equipment is not 
damaged. 

 

Keep the power cord away from hot surfaces. 

 

If you notice any unexplained changes in the performance of the device, if it is making 
unusual sounds, if the device or the power supply are dropped or mishandled, or if the 
enclosure is broken, discontinue use and contact your care provider or your ResMed 
Service Center. 

 

Do not open or modify the device. There are no user serviceable parts inside. Repairs and 
servicing should only be performed by an authorized ResMed service agent. 

Summary of Contents for AirSence 10























Reviews: