background image

 

English 1

 

 

ENGLISH 

Welcome 

The AirSense

 10 AutoSet

 and AirSense 10 Elite are ResMed's premium auto-adjusting pressure 

and Continuous Positive Airway Pressure (CPAP) devices. 

 

 WARNING 

 

Read this entire guide before using the device. 

 

Use the device according to the intended use provided in this guide. 

 

The advice provided by your prescribing doctor should be followed ahead of the 
information provided in this guide. 

 
 

Indications for use 

AirSense 10 AutoSet 

The AirSense 10 AutoSet self-adjusting device is indicated for the treatment of obstructive sleep 
apnea (OSA) in patients weighing more than 30 kg. It is intended for home and hospital use. 

 

The humidifier is intended for single patient use in the home environment and re-use in a 
hospital/institutional environment. 

 

AirSense 10 Elite 

The AirSense 10 Elite device is indicated for the treatment of obstructive sleep apnea (OSA) in 
patients weighing more than 30 kg. It is intended for home and hospital use. 

 

The humidifier is intended for single patient use in the home environment and re-use in a 
hospital/institutional environment. 

 

Contraindications 

Positive airway pressure therapy may be contraindicated in some patients with the following pre-
existing conditions: 

 

severe bullous lung disease 

 

pneumothorax 

 

pathologically low blood pressure 

 

dehydration 

 

cerebrospinal fluid leak, recent cranial surgery, or trauma. 

 
 

Adverse effects 

You should report unusual chest pain, severe headache, or increased breathlessness to your 
prescribing physician. An acute upper respiratory tract infection may require temporary 
discontinuation of treatment. 

 

The following side effects may arise during the course of therapy with the device: 

 

drying of the nose, mouth, or throat 

 

nosebleed 

 

bloating 

 

ear or sinus discomfort 

 

eye irritation 

 

skin rashes. 

 
 

Summary of Contents for AirSence 10























Reviews: