Resco StormCube WW version. Step-by-step Installation Guide. January 2018
4
WALL TO WALL VERSION
IMPORTANT
NOTES
•
When screwing into compact you must
pre-drill.
•
Use low setting on your drills when
screw fixing into Compact Laminate.
Compact Laminate can break screws or damage
the head if your drill is
too powerful.
•
Don’t use hammer drills when installing into
Compact Laminate.
•
Compact Laminate and Aluminium can damage
if not stored or treated properly – take care
when you are moving sheets.
Larger sheets require 2-man lift.
•
The system will be packed so division panels are
at the top and the doors are
at the bottom.
•
Use Diamond tip drill bits for drilling
into tiles.
•
Oversize Fascias – rivet infill in the middle (of
the 2 other rivets on the other side)
of the pedestal at the opposite side to ensure
that the infill can’t be moved.
Sit in place and ensure that all the doors are perfect
before final rivet. Therefore you can adjust. Ensure
plumb both ways.
Tools needed
• Level
• String line
• Chalk line
• Stool or small step ladder
• Timber blocks (155 mm)
• Timber wedges
• Rivet tool
• 3.5 mm drill bit
• 5 mm Masonry bit
• No. 1 Square drive
• No. 2 Pozi-drive
• Drop saw
• Nylon hammer
• Circular saw
Step-by-step
Installation Guide
Follow the installation instructions
and reference numbered steps on the
illustrations.
