manualshive.com logo in svg

Resco StormCube, Installation Manual

Share
Download
Resco StormCube Installation Manual Download Page 20

Resco StormCube-R version. Step-by-step Installation Guide. January 2018

      

9

RETURN VERSION

Step 

16

Place the first Stile over the appropriate floor mount 

bracket.
Check the Resco shop 
drawings to ensure 
that the Stile is 
orientated correctly.

Stile mounted over the 

floor bracket.

 

(Not to scale).

 

     

Fix losely

Fix to spigot

a.  

Make sure it sits flush on the floor then rivet through 
the Stile into the floor block.

Use 3.5mm drill bit with (D) Stainless Steel 
Pop Rivets.
b.  

Fix the top (loosely) through the Headrails predrilled 
holes into the Full Stile bracket.

Use 1 x (AA) 14g x 65mm Screw.

Headrail connecting 
into the Full Stile. 
(Not to scale).      

Full Stiles located in position over the floor mount brackets. (Indicative only. Not to scale.)    

Fascia

Door

Door

Door

Fascia

Fascia

Step 

17

Place the next Stile into position and fix in place. Check 
the ‘Resco shop drawings’ to ensure that the Stile is 

orientated correctly.  
Insert appropriate Fascia and align U-Channel with 
corresponding division panel. 

Apply 4 blobs of silicon in Stile pocket to prevent panel 
rattling in the future. 

a.  

Move Fascia (and division panel) sideways across into 

fixed Stile pocket. 

b.  

Ensure pushed hard into Headrail and put block 
under Fascia to maintain height. 

c.  

Slip second Stile onto the other side of the Fascia, by 
placing it orientated correctly over the floor mount.

d.  

Move the top-end in to position above the coach 
screw.

e.  

Fix loosely for now to Headrail.

Use 1 x (AA) 14g x 65mm Screw.

Summary of Contents for StormCube























Reviews:

No comments

Brands by name

Popular brands

Load more brands