Guide to ReplayTV
14
Finding out your computer’s network information
ReplayTV needs your IP Address, Subnet Mask, Default Gateway, and DNS Server to use
its Ethernet connection.
Note: These steps are for Microsoft Windows 98. If you are using a different version
of Windows, you may need to refer to your Windows manual to find how to display
your computer’s network information.
1.
Click on the Start button.
2.
Select Run.
3.
Type “command” and click OK. This will open the MS-DOS prompt window.
4.
Type “ipconfig/all” on the command line (at the blinking cursor) and the needed
configuration information will be displayed.
5.
Type “exit” to close the MS-DOS prompt window when you are finished.
Note: If your computer is behind a firewall, contact your network administrator or ISP for
configuration information.
Connecting ReplayTV to a VCR
Connect ReplayTV to a VCR if you want to watch or save your recordings on videotape.
Deleting recordings from the Replay Guide will preserve hard drive space.
•
Connect an A/V cable from the OUTPUT jacks on ReplayTV to the AUDIO/
VIDEO IN jacks on your VCR, matching like colors.
ReplayTV
VCR
Summary of Contents for RTV4040
