Reolink Go User Manual Download

Page: 19 / 104

Reolink 4G Battery-Powered Camera

User Manual

Charging indicator:

Notes:
• The battery is a built-in one. Please do not remove it from the camera.
• The Solar Panel is NOT included in the package, you can buy one on Reolink’s
official online store.

Initialize the Camera

1. Download and launch the Reolink App or Client software, and follow the
onscreen instructions to finish initial setup.

Scan to download the Reolink App.

2. Please turn the camera and wait for the camera starting up until you hear the
camera prompt “Network connection succeed”.

3. Scan the QR code on the back of the camera. If the phone doesn't respond,
please tap

Input UID/IP

and then manually type in the UID (16-digit characters

under the QR code of the camera).

Green LED

Fully charged

Orange LED

Charging

Summary of Contents for Go









































































































Search results

Summary of Contents for Go

Reviews:

Related manuals for Go

Brands by name

Popular brands

Reolink Go, User Manual

Search results

Summary of Contents for Go

Reviews:

Related manuals for Go

Brands by name

Popular brands