__________________________________________________________________________________
© Chr. Renz
MRB
12/23
4.8 Setting the current intensity on the dip switch block
Figure 6
Component
Description
DIP
Charging current setting to the vehicle
DIP 1 ON, rest OFF => 10 A
DIP 2 ON, rest OFF => 16 A
Float charge
DIP 6 ON, DIP 7 OFF => 6A
DIP 7 ON, DIP 6 OFF => 10A
Activation RS485 interface
DIP 8 OFF => RS485 switched off
DIP 8 ON => RS485 switched on
Table 4
4.8.1 Charging current setting
DIP switches 1 and 2 are used to set the maximum charging current that the charging station makes
available to the vehicle.
4.8.2 Trickle charge
DIP switches 6 and 7 are used to set a fixed charging current which is used when the charging station
goes into the "trickle charge" function.
With trickle charging, a charging process that is currently being carried out is continued with a fixed
charging current if the enable contact is opened during the charging process. Trickle charging is auto-
matically stopped when the vehicle stops charging.
