Model MMU-1600G Series Op Man - Ver 1.07.23 - Rev 20151026DL
Page 53 of 58
4.9.1 Ethernet IP Address
The left display is the ID Display (IP).
The other displays that are sequenced through are the IP
address.
In the example shown, the current Ethernet IP address is
192.168.1.31.
4.9.2 AC Line Voltage
The left display is the ID Display (AC).
The right display is the Data Display. The Data Display shows the current AC Line Voltage.
The line voltage is updated once per second.
In the example shown, the current AC Line Voltage is 115 VAC.
4.9.2.1 Configuration CRC
The left display is the ID Display (CRC).
The middle display is the first two digits of the CRC for the current configuration,
The right display is the last two digits of the CRC for the current configuration.
There is lower case “h” added to the end of the CRC to show that it is displayed in
hexadecimal format and that it is the second half of the value display.
In the example shown, the CRC for the current configuration is 0AD5h.
4.9.3 Configuration Display 1
The left display is the ID Display (C1).
The right display is the Data Display. On the Data Display:
R
- Shows the active Per Channel Red Enables.
Y
- Shows the active Minimum Yellow Change Disable jumpers on the Program Card.
G
- Shows the active Dual Indication / Field Check channels.
In the example shown, Per Channel Red Enable is enabled for all channels, Channels 3, 6, 9,
and 12 have Minimum Yellow Change Disable jumpers installed; and Dual Indication / Field
Check is enabled for all channels.
