Renkus-Heinz VARIAi VA101i-15, User Manual

Page: 14 / 16

i
Point Source Array Modules
14
VAX101-22 & VAX15S DSP Settings
Suggested DSP settings for VAX101-22 line array modules and their companion VAX15S
subwoofer combinations appear below and on the next page.
Note that these would not apply to self-powered VA101-22 modules with their built-in DSP.
AMP GAIN
OUTPUT DELAY
POLARITY
CROSSOVER
CENTER FREQUENCY 60 Hz HP 1.7 kHz LP 1.6 kHz HP NONE
TYPE BUTTERWORTH LINKWITZ-RILEY LINKWITZ-RILEY NONE
SLOPE 24 dB/ Oct 24 dB/ Oct 24 dB/ Oct NONE
EQ #1
CENTER FREQUENCY
Bandwidth
BOOST/CUT
EQ #2
CENTER FREQUENCY
Bandwidth
BOOST/CUT
EQ #3
CENTER FREQUENCY
Bandwidth
BOOST/CUT
EQ #4
CENTER FREQUENCY
Bandwidth
BOOST/CUT
VAX101-22
0 dB
0.530mS
NORMAL
125 Hz
0.4
4.0 dB
520 Hz
0.4
-1.5 dB
1.1 kHz
.5
-4.0 dB
1.8 kHz
.3
2.0 dB
-1.5 dB
13 kHz
.7
+9 dB
.3
4 dB
2.6 kHz
.4
-4 dB
4.7 kHz
.35
WIRED AS BI-AMP
LF HF
-7.5 dB
NONE
NORMAL
1.7 kHz
NOTES:
1. The EQ settings shown are for a single array module and may need “fine tuning” in multi cabinet arrays.
2. When the VAX101-22 is being used with a VAX15S subwoofer the VAX101-22 should be delayed 2.7 ms.
AMP GAIN
OUTPUT DELAY
POLARITY
CROSSOVER
CENTER FREQUENCY 40 Hz HP 80 Hz LP
TYPE BUTTERWORTH BUTTERWORTH
SLOPE 24 dB/ Oct 18 dB/ Oct
NORMAL
VAX15Si
0 dB
NONE