Renkus-Heinz VARIAi VA101i-15, User Manual

Page: 13 / 16

Point Source Array Modules
i
13
NOTES:
1. The EQ settings shown are for a single array module and may need “fine tuning” in multi cabinet arrays.
2. When the VAX101i-15 is being used with a VAX15Si subwoofer the VAX101i-15 should be delayed 2.7 ms.
AMP GAIN
OUTPUT DELAY
POLARITY
CROSSOVER
CENTER FREQUENCY 40 Hz HP 80 Hz LP
TYPE BUTTERWORTH BUTTERWORTH
SLOPE 24 dB/ Oct 18 dB/ Oct
NORMAL
0 dB
NONE
VAX15Si
VAX101i-15 & VAX15Si DSP Settings
Suggested DSP settings for VAX101i-15 line array modules and their companion VAX15Si subwoofer combinations appear below.
Note that these would not apply to self-powered VA101i-15 modules with their built-in DSP.
AMP GAIN
OUTPUT DELAY
POLARITY
CROSSOVER
CENTER FREQUENCY 60 Hz HP 1.7 kHz LP 1.7 kHz HP NONE
TYPE BUTTERWORTH LINKWITZ-RILEY LINKWITZ-RILEY NONE
SLOPE 24 dB/ Oct 24 dB/ Oct 24 dB/ Oct NONE
EQ #1
CENTER FREQUENCY
Bandwidth
BOOST/CUT
EQ #2
CENTER FREQUENCY
Bandwidth
BOOST/CUT
EQ #3
CENTER FREQUENCY
Bandwidth
BOOST/CUT
EQ #4
CENTER FREQUENCY
Bandwidth
BOOST/CUT
.5
2.2 kHz
.250
-3 dB
0.4
.3
-4.0 dB -3.0 dB
13 kHz
2.0 dB
1.8 kHz
3.2 kHz
.7
.7
+9 dB
1.1 kHz
0.4
3 dB
-1.5 dB
520 Hz
1.7 kHz
.3
4.0 dB
125 Hz
0.530mS
NORMAL
0 dB
VAX101i-15
WIRED AS BI-AMP
LF HF
-11 dB
NONE
NORMAL