Renkus-Heinz VARIAi VA101i-15, User Manual

Page: 12 / 16

i
Point Source Array Modules
12
AMP GAIN
OUTPUT DELAY
POLARITY
CROSSOVER
CENTER FREQUENCY 60 Hz HP 1.6 kHz LP 1.7 kHz HP NONE
TYPE BUTTERWORTH LINKWITZ-RILEY LINKWITZ-RILEY NONE
SLOPE 24 dB/ Oct 24 dB/ Oct 24 dB/ Oct NONE
EQ #1
CENTER FREQUENCY
Bandwidth
BOOST/CUT
EQ #2
CENTER FREQUENCY
Bandwidth
BOOST/CUT
EQ #3
CENTER FREQUENCY
Bandwidth
BOOST/CUT
EQ #4
CENTER FREQUENCY
Bandwidth
BOOST/CUT
-4.0 dB +2 dB
NONE .7
125 Hz
NONE +9 dB
NONE 13 kHz
1 kHz 4.5 kHz
.6
570 Hz 2.7 kHz
-3.0 dB -2 dB
WIRED AS BI-AMP
LF HF
VAX101i-7
0 dB -11 dB
1.5 kHz
0.4 .3
0.530mS NONE
NORMAL NORMAL
0.4
0.4 .3
4.0 dB 3 dB
VAX101i-7 & VAX15Si DSP Settings
Suggested DSP settings for VAX101i-7 line array modules and their companion VAX15Si subwoofer combinations appear below.
Note that these would not apply to self-powered VA101i-7 modules with their built-in DSP.
NOTES:
1. The EQ settings shown are for a single array module and may need “fine tuning” in multi cabinet arrays.
2. When the VAX101i-7 is being used with a VAX15Si subwoofer the VAX101i-7 should be delayed 2.7 ms.
AMP GAIN
OUTPUT DELAY
POLARITY
CROSSOVER
CENTER FREQUENCY 40 Hz HP 80 Hz LP
TYPE BUTTERWORTH BUTTERWORTH
SLOPE 24 dB/ Oct 18 dB/ Oct
NORMAL
VAX15Si
0 dB
NONE
DSP Settings