9
Wooden Stud Wall
• Determine the desired mounting location on the
wall. Locate a stud at the desired mounting loca-
tion. If there isn’t a stud at your desired mount-
ing location, you will need to locally reinforce the
wall as the loudspeakers are too heavy to mount
directly to gypsum wall board.
• The mounting bracket is centered on the loud-
speaker, the center hole of the wall bracket is a
good reference point for the center of the mounted
loudspeaker.
• Mark and drill pilot holes for the mounting screws.
• Mount the wall bracket to the wall using 1/4 in.
diameter x 2 in. long (6 mm dia. x 50 mm long)
lag bolts or equivalent. Use at least two mounting
screws or bolts.
Masonry Walls
• Determine the desired mounting location on the
wall. The mounting bracket is centered on the
loudspeaker, the center hole of the wall bracket
is a good reference point for the center of the
mounted loudspeaker.
• For mounting on concrete, CMU (concrete block)
or brick walls, use masonry sleeve anchors,
1/
4
in.
diameter x 1-
1/
2
in. long (6 mm dia. x 38 mm long)
Red Head Dynabolt or equivalent. Use at least two
mounting screws or bolts.
• Mark and drill clearance holes for the mount-
ing anchors following the anchor manufacturer’s
instructions for diameter and depth.
Mounting the loudspeaker to the bracket
• Slide the loudspeaker and it’s bracket half over
the wall bracket, drop down onto the 12 mm bolts,
and secure with the nuts and star washers.
• Select the horizontal aiming and tighten the bolts
securely to lock the aiming angle in place.
• Connect the audio and your loudspeaker is ready
to enjoy.
PCX8 and Wall Mount
