MULTIMEDIA SPEAKER PAIR
WARNINGS
● Before use of the product, please read this instructions manual and keep it for future reference.
The original document was prepared in Hungarian language. This appliance can be used by
children aged 8 years or above and persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge, provided that they are supervised or have been given
instructions concerning the use of the appliance and understand the hazards involved. Children
may not play with the appliance. Children may perform the cleaning or user maintenance of the
appliance subject to supervision. After removal of the packaging, inspect the product for possible
damage during shipment. Keep the packaging away from children if it contains plastic bags or
other potentially hazardous items. ● Avoid connecting or disconnecting cables during use. The
resulting noise may damage the device. ● In order to protect the audio system from external noise,
run audio cables separately from network cables. ● Turn off the device and disconnect the power
supply after use. ● Follow the usual safety rules. Do not touch the appliance, power cord or mains
charger (optional) with wet hands. ● Protect the device from dust, humidity, liquids, moisture, frost
and shocks, as well as from direct heat and sunlight. ● Only for use under dry, indoor conditions.
● Make sure that no foreign objects are inserted through the openings! ● Protect the device
from splashing water and avoid placing objects filled with liquids, such as drinking glasses on the
device. ● Do not place sources of open flame, such as candles on the device. ● Do not dismantle,
modify the device, as it may cause fire, accidents or electric shock. ● In case of a malfunction,
immediately disconnect the power supply and contact a professional technician. ● The speakers
contain magnets, so do not place sensitive products (e.g., credit card, tape recorder, compass...)
in their vicinity. ● Incorrect installation or unprofessional use will void the product warranty. ● This
product is for household, private use, it is not intended for commercial or industrial applications.
● After the useful life of the product, it is to be considered as hazardous waste. Dispose of the
product according to local legislation. ● Somogyi Elektronic Kft. certifies that the radio equipment
complies with Directive 2014/53/EU. The EU Declaration of Conformity is available at the following
website: [email protected] ● Due to continuous improvements, technical data, operation and
design are subject to change without notice. The most recent instructions manual is available for
download from the www.somogyi.hu website. ● However we regret such inconvenience, we do
not take any responsibility for possible printing errors.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
DISPOSAL
Waste equipment must be collected and disposed separately from household
waste because it may contain components hazardous to the environment or health. Used
or waste equipment may be dropped off free of charge at the point of sale, or at any
distributor which sells equipment of identical nature and function. Dispose of product at a
facility specializing in the collection of electronic waste. By doing so, you will protect the
environment as well as the health of others and yourself. If you have any questions,
contact the local waste management organization. We shall undertake the tasks pertinent
to the manufacturer as prescribed in the relevant regulations and shall bear any associated
costs arising.
● GAMER RGB LED light effect: optional customisation or off mode ● active stereo
speaker pair, bass reflex, 2x10W ● simultaneous wired and wireless connection: e.g. wired
connection to a computer, and BT connection to a mobile phone ● touch button to switch
between light effects and AUX/BT mode ● wireless BT connection ● 3.5mm jack for AUX
audio input ● 3.5mm headphone socket ● built-in power cord with USB plug ● power
supply from a computer or adapter (optional)● recommended mains USB adapter: SA
24USB, SA 50USB
APPLICATION
This multimedia speaker pair is primarily recommended for home or office use. It is perfectly suited
for connection to a computer, tablet or mobile phone. With wired connection to a computer, you
can still listen to your mobile phone via wireless BT connection. The bass is enhanced by a bass-
reflex port. Spectacular lighting effects can be adjusted and customised with a touch of a button.
POWER SUPPLY
Connect the USB cable to a computer or a mains USB adapter (not included). Recommended
mains charger option: SA 24USB, SA 50USB. The typical current consumption of this product is
~0.5A with normal use. If operated continuously at maximum volume and with the LED lights on,
this can occasionally reach 1A. For low-power USB sockets, we recommend turning off the light
effect and/or avoid setting maximum volume to reduce power consumption.
● USB sockets on computers and various devices have different charging parameters. Check
the specifications of the charger or USB socket before connecting. Maximum values in
general: USB2.0: 500 mA, USB3.0, 3.1: 900 mA, USB-C: 1.5A/3.0A
COMMISSIONING
Make sure that the unit is disconnected from the mains when making connections. Switch off both
the sound box and the device to be connected via the
AUX
socket. Make sure that the connectors
have correct wiring and polarity. Keep the audio cable away from power cords. Turn on the sound
box with the
rotary knob
on the front panel and set it to medium volume. When turned on, the
AUX
mode (wired input) is activated. You can start listening to the device connected with the
3.5mm stereo jack.
● The speaker with the rotary knob is the right channel, so place it on your right. For example,
you can put it next to the right side of the monitor and the other speaker on its left side. This
will make the stereo surround effect perfect. The two speakers should be up to ~1 metre apart.
VOLUME CONTROL AND FUNCTION SWITCHING
You can adjust the volume and switched on/off the unit using the
rotary knob
. The function you
want to use can be selected by touching and holding the
RGB
button on the top of this speaker
for a long time of about 2 seconds. A voice announcement informs you about the current mode.
The wired
AUX
input and the wireless BT connection enables to connect two different devices at
the same time. It is best to connect your computer via wired and your mobile phone via wireless
connection.
● The sound quality depends on the quality of the audio signal received from by the external
device and its volume and tone settings.
● If the sound box receives weak signal (low volume), it may cause extra noise, while a too
large signal may cause distortion. It is recommended to keep the volume of the source at
medium level.
● To make the appropriate connection, you may need to buy a connection cable or, in some
cases, an external adapter. For more information, see the user guide of the device you want
to connect.
AUX WIRED MODE
You can use a ø3.5mm stereo jack to receive the headphone or LINE OUT output of an external device.
For example: computer, multimedia player, musical instrument, CD/DVD player, mobile phone, tablet…
● In AUX mode, you need to find the tone settings in your computer’s settings. You may want to
install an appropriate program for better sound.
● In BT mode, correctly setting the volume and tone on the mobile phone is important for good
sound quality. You can choose from countless equalizer applications for free.
● Note that different signal sources and volume levels may require different settings. Otherwise,
the sound quality may deteriorate. Always find the best volume and tone settings for the
current program.
WIRELESS BT CONNECTION
Within a maximum range of 10 meters, the unit can be paired with other equipment communicating
according to the BT protocol. After pairing, you can listen to music played on your mobile phone, tablet,
notebook or other similar device. Choose the
BT
function by pressing and holding the
RGB
button.
Place the device to be paired in the vicinity of the unit, and find nearby wireless BT devices, including
this sound box, as described in its operating manual. Connect the two devices. Successful connection is
confirmed by an acoustic signal. Then you can listen to the desired program via the speakers.
● In BT mode, correctly setting the volume and tone on the mobile phone is important for good
sound quality.
● One sound box can be paired with one BT signal source at a time.
● If the wireless connection is lost, turn BT mode off and back on, if necessary, on either the
speaker or your mobile device.
● If you receive a phone call to the connected mobile phone while listening to music, the music
will pause. After your conversation, restart playback if it does not resume automatically.
● The actual range depends on the other device and the environmental conditions (e.g., walls,
human bodies, other electrical appliances, motion…)
● Electrical devices operated nearby may cause abnormal operation or noise; this does not
indicate a malfunction of the sound box!
● Abnormal operation may be caused by the individual characteristics of the external device;
this is not a sign of product malfunction. In certain cases, the BT functionality may be limited,
depending on the external device.
HEADPHONE SOCKET
You can insert a 3.5 mm diameter headphone jack into the socket next to the rotary knob. Now you
can then listen to music through your headphones instead of the speakers.
LED LIGHT EFFECT
An
RGB LED
light effect is activated when the sound box is switched on. You can choose from
several light shows or switch it off. Tap the
RGB touch button
briefly several times on top of the
active speaker and choose the one you like.
1x / the alternating rainbow effect stops in the selected state
2x / alternating solid red, blue, yellow, turquoise, pink and green light
3x / the colour change stops at the current colour from the ones above
4x / volume-dependent signal level meter
5x / LED lights off
● You can decrease current consumption by switching the lights off.
instruction manual / eredeti használati utasítás /
návod na použitie / manual de utilizare /
uputstvo za upotrebu / návod k použití
PCS 2100
Box
wide range bass-reflex, stereo
LED
2 x 5pcs RGB LED
Wired input
AUX 400mV (3.5mm plug)
Wireless input
BT protocol
Wired output
headphones (3.5mm socket)
BT version
4.2 / 10m max.
BT profile
A2DP
Pm/Pn
2 x 10W / 8W (4 Ohm)
f
50 – 18.000Hz
THD
≤1%
S/N
≥85dB
Speakers
2 x 3” (76mm)
USB Voltage
5V / 0,5A/1Amax.
Ta
5°C…+35°C
Dimensions /
Weight
(2x) 90x190x100mm / 0.99kg
