Operating instructions
RF-DKS-580 14-in-1 docking station
Item no. 2335666
Intended use
This docking station is intended to connect up to 14 additional devices using only one USB-C
TM
port on a laptop or mobile device (e.g. smartphone, tablet). It features two HDMI and one VGA
port for connecting monitors. Refer to the "Technical Data" section for information on supported
operating systems.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture
(e.g. in a bathroom) must be avoided under all circumstances.
For safety and approval purposes, do not rebuild and/or modify this product. If you use the
product for purposes other than those described above, it may be damaged. In addition,
improper use can cause hazards such as a short circuit or fire. Read the operating instructions
carefully and store them in a safe place. Only make this product available to third parties
together with its operating instructions.
This product complies with statutory, national and European regulations. All company and
product names contained herein are trademarks of their respective owners.
All rights reserved. HDMI is a registered trademark of HDMI Licensing L.L.C.
Package contents
• Docking station
• User manual
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads
or scan the QR code shown. Follow the instructions on the website. The
operating instructions for this product can also be downloaded from this link.
Explanation of symbols
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and tips on how to use the product.
Safety information
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety information and information on
proper handling in these operating instructions, we will assume no liability for
any resulting personal injury or damage to property. Such cases will invalidate
the warranty/guarantee.
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a
dangerous toy for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• Handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
• When setting up the product, make sure that the cables are not pinched, kinked
or damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them.
Risk of injury.
• The product must be easily accessible at all times.
• Never use the product immediately after it has been taken from a cold room into to
a warm one. This may cause condensation to form, which can destroy the product.
Allow the product to reach room temperature before connecting it and putting it
into use. This may take several hours.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorised use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in adverse ambient conditions or
- has been subjected to any serious transport-related stress.
• Consult a technician if you are not sure how to use or connect the product, or if
you have concerns about safety.
•
Maintenance, modifications and repairs may only be carried out by a technician
or a specialist repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
• Always observe the safety information and operating instructions of any other
devices which are connected to the product.
Connections
1 USB-C
TM
Connection cable
2 3.5 mm audio socket
3 USB-C
TM
Power Delivery port
4 USB-C
TM
port (data)
5 USB-A 2.0 port
6 HDMI port (2x)
7 VGA port
8 RJ45 Ethernet port
9 microSD card reader
10 SD card reader
11 USB-A 2.0 port
12 USB-A 3.0 port (3x)
Setup
Some operating systems are not compatible with this product. Refer to the "Technical
data" section for information on supported operating systems.
•
Place the docking station on a firm, scratch-proof surface next to your laptop or mobile
device.
• Connect the USB-C
TM
connection cable
(1)
to a USB-C
TM
port on your laptop or mobile
device.
If you want to supply your laptop or mobile device with power at the same time, connect
a suitable USB-C
TM
Power Delivery (PD) charger (max. 100 W) to the USB-C
TM
Power
Delivery port
(3)
.
Ensure the charger meets the power supply requirements (voltage and power) of your
laptop or mobile device.
If a charger is plugged into or disconnected from the USB-C
TM
port with Power
Delivery function
(3)
, the connected laptop or mobile device will be briefly
disconnected and reconnected within a few seconds. To avoid data loss, do not plug
in or disconnect the charger when data is being transferred.
• Up to 3 displays can be connected to the HDMI
(6)
and VGA ports
(7)
at the same time.
• For data transfer (e.g. from USB sticks, cameras or external hard disks), it is recommended
to use the faster USB 3.0 ports
(12)
.
• For microSD and SD memory cards, you can use the microSD card reader
(9)
or SD card
reader
(10)
.
• The USB 2.0 connections
(5)
&
(11)
are primarily designed for input devices such as
a keyboard or mouse.
When transferring data, always make sure that your mobile device is sufficiently
charged. A suddenly discharged battery can lead to data loss during data transfer.
When an external device (e.g. keyboard or display) is connected, it may not work
immediately. It may take several seconds for an external device to be activated.
