GPS functions
The GPS function is only active if the alarm function is enabled.
With the help of the GPS receiver you can get your current GPS position.
You also have the option to get a notification, when the product leaves a previously defined
(permitted) safety area.
Depending on the positioning of the GPS module, the line of sight to the sky and
current weather conditions, it can take up to 5 minutes until a GPS a geolocation is
returned.
The time to detect the location can be reduced by optimizing the location of the GPS
module.
Within the first 30 minutes following the position measurement, the GPS position data
may have a higher deviation rate. This is related to the GPS signal, which requires
correction data to become highly accurate. This data is superimposed on the GPS
signal and is usually transmitted once every 30 minutes.
Turning the GPS system on:
SET GPS #1513
Turning the GPS system off:
RESET GPS #1513
Retrieving GPS coordinates:
The following command queries the current GPS data. It also creates a link to Google Maps with
the location shown in Google Maps. You only need to tap the link in the reply SMS.
The command is:
TEST GPS #1513
26
