(5)
(3)
(14)
(21)
(19)
(14)
(5)
(18)
6
(16)
(21)
7
• Step 7: When tightening the screws (16), ensure they are inserted into the nuts from steps
2 and 4.
(21)
(19)
(15)
(18)
(4)
(7)
(7)
8
• Step 8: When tightening the hinges, ensure that the magnet ( ) is on the back of the
door (4).
Tighten the screw (15) using the 2.5 mm hex key (21). Hold the nut (18) in place using the
jaw spanner (19).
(21)
(16)
(19)
(17)
(18)
(6)
9
• Step 9: Tighten the screw (16) using the 2.5 mm hex key (21). Hold the nut (18) in place
using the jaw spanner (19).
(15)
(19)
(18)
(18)
(21)
(21)
10
• Step 10: Tighten the screw (15) from the outside using the 2.5 mm hex key (21). Hold the
nut (18) in place from the inside using the jaw spanner (19).
(18)
(9)
2x
11
• Step 11: Place a nut (18) into each slot on the side panel (9).
(16)
(21)
(8)
(9)
(9)
12
• Step 12: When tightening the screws (16), ensure they are inserted into the nuts from
step 12.
(16)
(21)
(10)
(9)
(9)
(8)
13
