(20)
1
(1)
(18)
2
• Step 2: Place one nut (18) into each slot on the left panel (1).
(1)
(12)
(20)
3
(2)
(18)
4
• Step 4: Place one nut (18) into each slot on the right panel (2).
(12)
(20)
(2)
5
Downloading the latest installation instructions
Download the latest installation instructions at www.conrad.com/downloads
or scan the QR code on this page. Follow the instructions on the website.
Explanation of symbols
This symbol is used to highlight important information in these operating instructions.
Always read this information carefully.
This symbol indicates special information and advice on how to use the product.
Installation
Read the installation instructions and safety information carefully. The safety
instructions are included with the product. We shall not be held liable for
personal injuries or damage to property arising due to failure to follow the
safety instructions. Such cases will invalidate the warranty/guarantee.
Tighten the screws slightly. Ensure that the parts are aligned, and then secure the
screws in place.
Installation instructions
Housing made of acyrlic for RF100
Item no. 1528625
Intended use
The product is intended for mounting at and onto the 3D printer RF100 (item no. 1507428)
and provides an optimal printing environment. The printed object is protected from dust and
draught, which leads to better printing results. The product makes it difficult to reach into the
moving printing mechanic and to touch the printing nozzle.
For safety reasons, you must not rebuild and/or modify this product. Using the product for
purposes other than those described above may damage the product. In addition, improper
use may create safety hazards. Read the safety and installation instructions carefully and store
them in a safe place. Make this product available to third parties only together with the safety
instructions.
This product complies with statutory national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Package contents
1
7
6
5
4
2
3
8
9
12
13
10
11
14
15
16
17
18
19
20
21
1 Left panel
1x
12 M3x8 countersunk screw
30x
2 Right panel
1x
13 M3x12 countersunk screw
6x
3 Door frame
1x
14 M3x12 screw
4x
4 Door
1x
15 M3x10 screw
10x
5 Magnetic clamp
1x
16 M3x16 screw
16x
6 Handle
1x
17 M3 washer
6x
7 Hinge
2x
18 M3 nut
30x
8 Front cover
1x
19 Jaw spanner
1x
9 Side cover
2x
20 2.0 mm hex key
1x
10 Back cover
1x
21 2.5 mm hex key
1x
11 Top cover
1x
