• Choose appropriate tools, meters and, if necessary, personal protective equip-
ment
• Evaluation of the measurement results
• Selection of the electrical installation material to ensure the shutdown conditions
• IP protection types
• Installation of the electrical installation material
• Type of mains supply network (TN system, IT system, TT system) and the con-
nection conditions that follow from them (classical earthing, protective earthing,
required additional measures, etc.)
If you do not have the expertise required for the installation, do not connect
and install it yourself, but ask a qualified technician.
a) General
• The unauthorised conversion and/or modification of the product is not allowed for
safety and approval reasons. Never open/dismantle it (apart from installation and
connection procedures described in the manual)! It does not contain any internal
parts that need to be adjusted or maintained by you.
• Maintenance, adjustment or repair work may only be carried out by an expert/
authorised service centre, which is familiar with the hazards involved and the rel-
evant regulations.
• The moisture-proof LED diffuser luminaire is not a toy and should be kept out of
the reach of children! There is danger of a life-threatening electric shock! Install
the moisture-proof LED diffuser luminaire so that it cannot be reached by children.
• Attention, LED light: Do not look directly into the LED light! Do not look directly or
with optical instruments into the light!
• Do not expose the moisture-proof LED diffuser luminaire to extreme temperatures,
strong vibrations or strong mechanical stress.
• On industrial sites, the accident prevention regulations of the association of the
industrial workers‘ society for electrical equipment and utilities must be followed!
• Do not leave the packaging material lying around carelessly as it may be a danger
to children.
• Handle the product with care; it can be damaged by impacts, blows or falls even
from a low height.
• If you have any questions that are not answered in this manual, please contact our
technical service or another specialist.
b) Installation/Operating Location
• The moisture-proof LED diffuser luminaire may be installed and operated indoors
and outdoors. However, never install it in water.
• Never cover the moisture-proof LED diffuser luminaire.
• Use the moisture-proof LED diffuser luminaire only when it is permanently mount-
ed. However, never install the moisture-proof LED diffuser luminaire on or inside
vehicles.
• Do not mount or operate the moisture-proof LED diffuser luminaire in rooms, or
under adverse environmental conditions, where combustible gases, vapours or
dust are or may be present! There is a danger of explosion!
• Do not install or attach objects (e.g., decorative material) to the moisture-proof
LED diffuser luminaire.
c) Installation, Connection
• The product is constructed according to Protection Class II.
• The moisture-proof LED diffuser luminaire may be connected only to the mains
voltage (see section „Technical Data“). Never try to operate the product at another
voltage, as this will result in the destruction of the product.
• The moisture-proof LED diffuser luminaire must not be connected and operated
via a dimmer.
• During installation, all poles must be disconnected from the mains voltage, e.g.,
via RCD. Between the RCD and the product, there must be an appropriately di-
mensioned fuse or circuit breaker (max. 16 A).
• Perform installation and connection only when all supply lines are disconnected
from the mains voltage. Otherwise, there is a risk of a life-threatening electric
shock!
• Do not connect the product to the power supply immediately after it has been
transferred from a cold room into a warm one (e.g., during transport). The conden-
sation that forms might destroy the device. Moreover, there is danger of electric
shock!
Allow the product to reach room temperature. Wait until the condensation has
evaporated. This might take several hours. Only after this, should it be installed,
connected to the mains supply and put into use.
Operating instructions
LED humidor diffuser luminaire 24 W
Item no. 1483723
Intended use
The product is designed according to protection class IP65 for lighting in damp locations, base-
ments or outdoor area.
For safety and approval reasons, you may not convert and/or alter the product. If you use the
product for purposes other than those described above, the product may be damaged. Moreo-
ver, the improper use involves risks such as short-circuits, fire, electric shocks, etc. Please read
the operating instructions carefully and do not discard them. If you pass the product on to a third
party, please hand over these operating instructions as well.
This product complies with the applicable national and European regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Package Contents
• Diffuser luminaire
• 2x holding bracket
• 4x screw
• 4x dowel
• Operating Instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website.
Explanation of Symbols
The lightning symbol inside a triangle is intended to alert you of health hazards, e.
g., risk of electrical shock.
An exclamation mark in a triangle indicates important instructions in this operating
manual which absolutely have to be observed.
The arrow symbol is used when specific tips and information on handling are pro-
vided.
The product is not dimmable.
The product is designed according to protection Class II (reinforced or double insu-
lation between the mains supply circuit and output voltage; protective insulation)
Observe the operating instructions!
Safety Instructions
Please read the operating instructions carefully and pay particular attention to
the safety instructions. We do not assume liability for injuries/material damag-
es resulting from failure to observe the safety instructions and the information
in these operating instructions regarding the proper handling of the product.
Furthermore, in such cases, the warranty/guarantee will be null and void.
Attention, important note!
Only people with relevant electro-technical knowledge and experience should
carry out the installation! *)
If it is installed improperly, you risk:
• your own life
• the life of the user of the electrical system.
If it is not installed properly, you risk severe damage to property, e.g., by fire.
You face the risk of personal liability for personal injury and material damage.
Contact an electrician!
*) Specialist knowledge required for the installation:
For the installation, in particular, the following specialist knowledge is required:
the applicable „5 safety rules“: Switch off power; secure against switching back
on; determine voltage-free status; earthing and short-circuiting; cover or fence off
nearby live parts
