Renishaw MIH, User Manual, Page: 41 / 61

39 The LCD/software facility
6.6 Using a sequence
When using a sequence, the only requirement is to position the
MIH following the axis direction arrows and lock up once the correct
position is reached. On unlock, the sequence will automatically
increment to the next step and the direction arrows will indicate the
direction each axis must be rotated to, in order to achieve the position
stored in that step.
Step 1
To use a sequence, either press the M- button from the ‘USE Ed’
display or the M+ button from the ‘End USE’ display. Either of these
actions will automatically start the sequence at step 1. The memory
contents of sequence step 1 are displayed and the fl ashing direction
arrows indicate the direction in which each axis must be rotated to
achieve the position stored in sequence step 1. If the head is already
in this position, the position confi rmation block will be displayed.
If the head is not in this position, unlock the head and follow the
direction arrows. The display will show live positional data and the
position confi rmation block will confi rm when the correct position has
been reached.