Renishaw MIH, User Manual, Page: 35 / 61

33 The LCD/software facility
NOTES: If the head is locked in an incorrect position, the direction
arrows will fl ash. The arrows will stop fl ashing after 10 seconds and
the display will return to simple mode showing “live” position data. If
either button is pressed, the screen will return to the last used memory
display.
The memory numbers are incremented or decremented by pressing
either the M+ or M- buttons respectively. Pressing either button and
keeping it pressed will cause the memory numbers to scroll up or
down at the rate of two per second.
6.5 Sequence mode
When the battery is fi rst inserted, sequence step 1 contains the
contents of memory 1, sequence step 2 contains the contents of
memory 2 and so on up to sequence step 19. Step 20 contains an end
of sequence marker (E).
By pressing the M+ and M- buttons simultaneously (for 5 seconds)
when the head is locked in simple mode, sequence mode is entered.
The display gives the choice to either use the existing sequence
(press M- button) or edit the sequence to create a new one (press
M+). If no choice is made within 5 seconds, the display will return to
simple mode.
Figure 11