Product compliance
C
Renishaw plc declares that EVOLUTE complies with the applicable standards and regulations.
A copy of the EC Declaration of Conformity is available on request.
FCC compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
The user is cautioned that any changes or modifications not expressly approved by Renishaw plc or
authorised representative could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
NOTE:
This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used
with the unit to ensure compliance.
RoHS compliance
Compliant with EC directive 2011/65/EU (RoHS).
Patents
Features of Renishaw’s encoder systems and similar products are the subjects of the following patents and
patent applications:
Disclaimer
RENISHAW HAS MADE CONSIDERABLE EFFORTS TO ENSURE THE CONTENT OF THIS DOCUMENT
IS CORRECT AT THE DATE OF PUBLICATION BUT MAKES NO WARRANTIES OR REPRESENTATIONS
REGARDING THE CONTENT. RENISHAW EXCLUDES LIABILITY, HOWSOEVER ARISING, FOR ANY
INACCURACIES IN THIS DOCUMENT.
The use of this symbol on Renishaw products and/or accompanying documentation indicates that the
product should not be mixed with general household waste upon disposal. It is the responsibility of the end
user to dispose of this product at a designated collection point for waste electrical and electronic equipment
(WEEE) to enable reuse or recycling. Correct disposal of this product will help to save valuable resources
and prevent potential negative effects on the environment. For more information, please contact your local
waste disposal service or Renishaw distributor.
The packaging of our products contains the following materials and can be recycled.
Packaging Component
Material
ISO 11469
Recycling Guidance
Outer box
Cardboard
Not applicable
Recyclable
Polypropylene
PP
Recyclable
Inserts
Low Density Polyethylene Foam
LDPE
Recyclable
Cardboard
Not applicable
Recyclable
Bags
High Density Polyethylene Bag
HDPE
Recyclable
Metalised Polyethylene
PE
Recyclable
Further information
Further information relating to the EVOLUTE encoder range can be found in the EVOLUTE Data sheets
available from your local representative. This document may not be copied or reproduced in whole or in
part, or transferred to any other media or language, by any means without the written prior permission of
Renishaw. The publication of material within this document does not imply freedom from the patent rights
of Renishaw plc.
EVOLUTE RTLA50-S installation guide
1
CN1260551 US7499827 JP4008356 GB2395005 CN1314511
EP1469969
JP5002559
CN102197282 EP2350570
JP2012507028
US20110173832 KR20110088506 CN102388295 EP2417423
KR20120014902
US2012007980 CN102460077
EP2438402
US20120072169 KR20120026579
US8141265
EP2294363
CN102057256 JP2011524534 KR20110033204
