30
Service and maintenance
Service
You may undertake the maintenance routines
described in these instructions.
Equipment requiring repair, overhaul or attention
under warranty should be returned to your
supplier.
Maintenance
WARNING:
Compressed air can cause physical
injuries.
CAUTION:
The APC is a precision tool and must
be handled with care.
NOTE:
Ensure the APC is firmly secured to its
mounting. Build-up of swarf on or around the APC
will be detrimental to its operation.
The APC requires minimal maintenance as it is
designed to operate as a permanent fixture on
CNC machine tools, where it is subject to a hot
chip and coolant environment. Service interval will
depend on operating environment and must be
adjusted accordingly; see “Cleaning instructions”
on page 31.
Summary of Contents for APCA 45
