the clamp’s position on the member before resuming lift.
WARNING: Apply required torque on screw. Do not over tighten.
Step 7.
Commence lift.
WARNING: The operator should position himself away from and
fully clear of the member to be lifted.
Do not commence lift until all personnel are clear of the area of
the lift. Never stand under or near a member being lifted. Do not
permit the member being lifted to contact adjacent structures or
equipment.
Step 8.
To remove clamp (after load is fully supported and at rest in a stable
position) relax lifting force and loosen screw. Lift clamp from plate.
Step 9
Inspect clamp. Remove from service if clamp is in need of repair.
