MODEL RSC
ROTATING SCREW CLAMP
APPLICATION RSC
The Model RSC Clamp is a vertical lift clamp capable of lift and turn
operations from the horizontal through 180 degree arc. The sus-
pended load may also be rotated 360 degrees about the vertical axis.
Refer to Illustrations A & B next page. Side loading is limited to 10 de-
grees from the vertical axis. Refer to additional instructions in the Op-
erations Section. The adjusting screw is used to accommodate vari-
ous thicknesses of material and to facilitate attachment of the clamp to
the member to be lifted. Refer to Definitions Pages for explanation of
“Locking Screw” clamp. For identification of component parts, refer to
the detail drawings of the clamp at the end of the Maintenance Sec-
tion.
WARNING: Refer to the sections on Operation and Maintenance
for the approved procedure in the Operation and Maintenance of
this product.
