en
This function is available in all views of Renfert and Expert mode and is not explained again there.
4.2.2 File functions
Icon
Name
Description
New Proj
Creates a new project�
Open
Loads an existing SIMPLEX sliceware project (*.cwprj file).
Alternatively, this can also be used to add an additional print
object�
Save
Saves the project�
SaveAs
Saves the project under a new name�
When saving, do not use special characters or umlaut characters in the file name!
4.2.3 Undoing / redoing actions
Icon
Name
Description
Undo
The last step is undone�
Redo
The last step is redone�
4.2.4 Selecting print objects
When you move the cursor over a print object, the cursor changes into a hand icon�
⇒
Left-click to select an object:
♦
The object is shown in color�
♦
The space that the object takes up is shown�
To select multiple objects, click them with the Ctrl key pressed�
4.2.5 Adding / removing objects
Icon
Name
Description
Add
Adds a print object�
Remove
Removes a print object�
Adding an object:
⇒
Click "Add"�
♦ A dialog opens where you can open a file.
⇒
Select the directory in which the 3D data (*�stl or *�obj) is stored�
⇒
Select the required object�
♦
The object is placed in the center of the print bed�
Alternatively, you can also use the "Load" file function to place an object on the print bed or do so directly
from Explorer using drag-and-drop�
You can place multiple objects on the print bed�
All selected print objects must be printed using the same filament!
- 6 -
