en
1 Introduction
SIMPLEX sliceware was developed with the goal of simplifying and perfecting the 3D printing process
with filaments.
To print a 3D object, the SIMPLEX 3D-filament-printer requires tool path information (G-Codes).
With SIMPLEX sliceware, this G-Code is generated from 3D object files (e.g., *.stl or *.obj).
SIMPLEX sliceware features two modes, Renfert mode and Expert mode�
1.1 Symbols used
Symbols with the following meanings are used in these instructions or on the equipment:
Caution
Risk of damage to the equipment if the instruction is not followed.
Notice
Provides the operator with useful information that eases use.
►
List, particular attention should be paid
• List
-Subordinate list
⇒
Instructions / appropriate action / input / operational sequence:
You are asked to carry out the specified action in the order indicated.
♦ Result of an action / response by the equipment / response by the program:
The equipment or program responds as a result of your actions or when a specific incident occurs.
Other symbols are explained as they occur�
2 Safety
Before using SIMPLEX sliceware, read this user manual carefully and keep it for future reference� Renfert
GmbH reserves the right to modify or revise this user manual at its own discretion at any time�
2.1 Disclaimer
Renfert GmbH shall be absolved from all claims for damages or warranty if:
► The product is employed for any purposes other than those specified in the operating instruc
-
tions.
►
The product is altered in any way other than those alterations described in the operating instruc-
tions.
- 3 -
